Konica Minolta bizhub C550 bizhub C550 Fax Operations User Manual - Page 382

Utility mode 10 6 Set "Output Method". - [Forward & Print]: The received original is forwarded and this machine prints the original. - [Forward & Print (If TX Fails)]: The received original is forwarded and when it cannot be forwarded, this machine prints the original. 7 Touch [Forward Dest.] and enter the fax number of the recipient to whom the received original is to be forwarded. - Using the control panel keypad or the keyboard that appears in the touch panel, type in the fax number of the forwarding destination. - To select a registered address book destination or a group destination, touch [Select from Address Book]. - If the fax multi line kit has been installed, touch [Select Line] to select the telephone line. - Only the fax number can be entered directly (maximum of 38 digits). - [Tone], [Pause], [-] can be used. Refer to "Fax number input proce- dure of the destination specification by direct input", for how to use these buttons. Refer to "Specifying by direct input" on page 2-23 for the destination specification by the direct input. - The forwarding destination can be selected from the list of registered destinations by touching [Select from Address Book]. Registered fax, e-mail, user box, SMB, FTP, Internet fax or IP address fax destinations can be selected. - In order to use the Internet fax and the IP address fax functions, a technical expert must specify the settings. Contact your service representative for details. - When [C] (clear) key is pressed, all entered contents are deleted. 8 Touch [OK]. The settings are changed. 9 Touch [Close] until it returns to Fax/Scan screen. C550 10-76