Konica Minolta bizhub C550 bizhub C550 Fax Operations User Manual - Page 483
Fax glossary, The glossary explains the terms generally used for fax transmission.
View all Konica Minolta bizhub C550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 483 highlights
Appendix 12 12.3 Fax glossary The glossary explains the terms generally used for fax transmission. The terms of the functions that are not stored for this machine are also explained. Terms Explanation bps This is an abbreviation of bit per second. It means the amount of data sent in 1 second as the unit of data transmission. ECM (Error Correction Mode: Error correction mode) Error resend mode of G3 communication. It confirms whether the data is correctly sent to the recipient or not, and if it is not correctly sent, it communicates by resending the same data. If the recipient is set for the ECM mode and the communication is done in ECM unless ECM off is specified in this machine. F-code This is the communication procedure about the usage of the sub address of T.30* standardized by ITU-T (International Telecommunication Union) provided by CIAJ (Communications and Information network Association of Japan). In the communication between fax with F code function, various functions that uses F code can be used even if the maker is different. In this machine, F code is used in the bulletin boards, relay request, relay transmissions, confidential communication, password transmission. (*Communication standard) G3 This is a fax communication mode standardized by the ITU-T (International Telecommunication Union). The communication modes are G3 and G4. G3 is currently the most popularly used mode. LDAP Abbreviation of Lightweight Directory Access Protocol. A protocol to access the database that can manage information concerned with the environment and the mail address of the user for using the network through the TCP/IP network such as internet or intranet. PB Push telephone line Super G3 (SG3) This is a G3 communication mode standardized by ITU-T V. 34. The communication can be carried out at a higher speed (high speed 33,400bps) than that of the usual G3 communication. V. 34 This is a communication mode used at the time of fax communication of super G3. There are cases when the communication is not possible in super G3 mode depending on the telephone line conditions when the recipient's machine/ own machine is connected to a telephone line via private branch exchange. In such cases, it is recommended to communicate with super G3 mode is turned off by selecting the V. 34 OFF. Z-Folded Original This function first confirms the original size which cannot be detected correct original size due to folds, then scans and sends after verifying the correct original size. This function can be used only when the original is scanned by ADF. Batch transmis- This is a function automatically sends one original at a specified time, if the sion transmission conditions such as destination, sending time, memory trans- mission or resolution stored in the same original memory. Overseas communication This is a function to communicate with an overseas recipient. If an overseas communication mode is set, the fax is sent with a lower speed. Specifying an overseas TX ensures the fax transmission when faxing to the location where transmission conditions are poor, even within the country. C550 12-7