Konica Minolta bizhub PRESS C71hc bizhub PRESS C1060/C1070/C1070P/C71hc/PRO C1 - Page 47
Additional Information for Controller Administrator Setting
View all Konica Minolta bizhub PRESS C71hc manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4.2 Additional Information for Controller Administrator Setting 4 4.2 Additional Information for Controller Administrator Setting The following contents have been added to Software Switch Setting in Administrator Setting (Controller Administrator Setting). Refer also to [Settings and Adjustments] - [Utility/Counter] - [Administrator Setting] - [Controller Administrator Setting] - [Software Switch Setting: Setting the Software Switch] in the HTML User's Guide. - All software switches are set to Off by default. Switch from Off to On in order to solve the problem. - Never switch from Off to On for the switch number that is not described in the following List of Software Switch Setting. Switch No. 110 111 Problem/Requirement Solution reached when turned On When a specific PS job is processed in direct printing, the print quantity specified in PJL may not be reflected resulting in only one set of output. The print quantity specified in PJL should be properly reflected. * A specific PS job (*) is a job whose job settings such as Staple are specified by PS Custom Operator. The staple setting specified per page for PS files should be supported. The print quantity specified in PJL is prioritized. Setting value: Off: Do not support the staple setting On: Support the staple setting bizhub PRESS C1070/C1070P/C1060, bizhub PRO C1060L 4-3