Konica Minolta magicolor plus magicolor plus Captureboard C-12 Series Tool Box - Page 16

Basic Operation Step 7 (continued) This permits the saving of the superimposed image of the hand written and drawn image data of the Captureboard sheet surface and the projector projection image. Using this saved image, a meeting report or document can be created. Printing Printing is performed by the printer that is connected to the personal computer. ቢ Select [Print (P)] from [File (F)] of pull-down menu. The printing settings screen will open. ባ Clicking the [Print] button will print the selected image. Clicking the [Detailed Settings] button for settings. This screen will differ depending on the printer. Note The superimposed image cannot be printed directly using the Captureboard and the printer connected to it (which is sold separately). Closing Clicking (Close) will close the superimposed image display screen. Closing the superimposed image without saving it will result in the loss of the image. To capture with the next sheet surface, proceed from Step 4. Closing this Software Clicking software. (Close) of the main menu will close this Notice When other TWAIN compatible applications are used to capture the picture data, while PLUS TOOLBOX software is running, following procedure should be taken. When PLUS TOOLBOX is running or its icon appears on the Windows task bar, and the picture data is attempted to be captured using other TWAIN compatible application software, below error message may pop up. In this case, right-click the PLUS TOOLBOX icon on the task bar to quit the program and start capturing procedure using other TWAIN compatible software. E-16