Konica Minolta bizhub C35 bizhub C35 Reference Guide - Page 175

- [Ethernet Frame Type]: Select [Auto]. (Select the frame type according to the network environment.) - [NetWare Print Mode]: Select [PServer]. - [Print Server Name]: Specify the print server name created in step 4. - [Print Server Password]: Specify only when setting from the NetWare server. - [Print Queue Scan Rate]: Specify 1. (Change as necessary.) - [Bindery/NDS]: Select [NDS]. - [Preferred NDS Context Name]: Specify the name of the context that connects to Pserver. - [Preferred NDS Tree Name]: Specify the name of the tree that Pserver logs on to. 6 Restart the printer (turn the printer off, then on again). 7 Use the NetWare server console to load MONITOR.NLM. 8 Select the connection information and, in the active connection column, check that the created Pserver is connected. For NetWare 5.x/6 Novell Distributed Print Service (NDPS) " Before specifying settings for NDPS, check that the NDPS broker and NDPS manager have been created and loaded. " Also, before performing the following procedure, check that the TCP/ IP protocol has been set in the NetWare server, and check that the IP address has been set for this machine and that this machine is on. 1 Log on to NetWare as an administrator from a client computer. 2 Start up NWadmin. 3 Right-click the organization or organizational unit container where you will create the printer agent, and then click [NDPS Printer] on the [Create] submenu. 4 In the [NDPS Printer Name] box, enter the printer name. 5 In the [Printer Agent Source] column, select [Create a New Printer Agent], and then click the [Create] button. 6 Check the printer agent name, and then in the [NDPS Manager Name] box, browse through the NDPS manager names, and register one. 3-8 Printing With NetWare