Konica Minolta bizhub C35 bizhub C35 Reference Guide - Page 231
Setting the Address Manually - instruction manual
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
3 After "Welcome!" appears in the control panel of the machine, print the configuration page, and then check the IP address that has been specified. Print the configuration page by pressing the buttons indicated below. [Utility Settings] - [User Settings] - [Print Settings] - [Print Reports] - [Configuration Page] 4 Install the printer driver and utilities. " If the machine cannot be connected to a DHCP server, an IP address within the range between 169.254.0.0 and 169.254.255.255 is automatically set. Setting the Address Manually You may also manually change the machine's IP address, subnet mask, and gateway by using the following instructions. (See Chapter 5 "Understanding the Ethernet Configuration Menus" for more information.) " When manually setting the IP address, turn off DHCP, BOOTP and ARP/PING first. In addition, when the IP address is changed, add a new port or reinstall the printer driver. CAUTION You should always notify your network's administrator before changing the machine's IP address. 1 Turn on your PC and machine. 2 After "Welcome!" appears in the control panel of the machine, specify the IP address. Specify the IP address by pressing the buttons indicated below. [Utility Settings] - [Admin Settings] - [Ethernet] - [TCP/IP] - [IP Address] Change the setting, and then press [OK]. 3 If you don't set the subnet mask or gateway, go to step 5. If you don't set the subnet mask, but you set the gateway, go to step 4. Specify the subnet mask for this machine. Specify the subnet mask by pressing the buttons indicated below. [Utility Settings] - [Admin Settings] - [Ethernet] - [TCP/IP] - [Subnet Mask] Change the setting, and then press [OK]. 7-4 Network Connection