Konica Minolta bizhub C35 bizhub C35 Reference Guide - Page 480
If [Enable] is selected, SNMPv3 IP is
View all Konica Minolta bizhub C35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 480 highlights
The [Network] - [SNMP Settings] - [SNMP Settings] page allows you to configure the following items. Item [SNMP Set- [SNMP] tings] Description If [Enable] is selected, SNMP is enabled. Choices: [Enable], [Disable] Default: [Enable] Configuration menu equivalent: [Admin Settings] - [Ethernet] [TCP/IP] - [SNMP] [SNMP v1/v2c(IP)] If [Enable] is selected, SNMPv1/v2c (IP) is enabled. Choices: [Enable], [Disable] [SNMP v3(IP)] Default: [Enable] If [Enable] is selected, SNMPv3 (IP) is enabled. Choices: [Enable], [Disable] [SNMP v1(IPX)] Default: [Enable] If [Enable] is selected, SNMPv1 (IPX) is enabled. [UDP Port] Choices: [Enable], [Disable] Default: [Enable] " This item is available only if [IPX/ SPX] in the [Network] - [NetWare Settings] - [NetWare Settings] page is set to [Enable]. Specify the UDP port number. Range: 1 to 65535 Default: [161] " The numbers 427 and 500 cannot be specified. Configuring the Printer 8-213