Kyocera 2035 User Guide - Page 44
Align the slots in the phone to - faceplate
View all Kyocera 2035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
d. Tilt the phone to remove the battery. The ESN is visible after the battery is removed. It should start with "179-" or "B3-." Replace the battery as follows: a. Extend the antenna. d b. Place the battery into the phone with the metal contacts facing down and towards the bottom of the phone. c. Lay the keypad flat inside the faceplate. d. Align the slots in the phone to the posts on the faceplate. e. Close until latched together. f. Align the battery door to the grooves on either side of the phone. g. Slide the battery door on while pressing down firmly, ensuring that the battery door clicks into place. Check and repeat if the battery door is not aligned. Do not force. 38 e c Troubleshooting
38
Troubleshooting
d.
Tilt the phone to remove the
battery. The ESN is visible after the
battery is removed. It should start
with
“
179-
”
or
“
B3-.
”
Replace the battery as follows:
a.
Extend the antenna.
b.
Place the battery into the phone
with the metal contacts facing
down and towards the bottom of
the phone.
c.
Lay the keypad flat inside the
faceplate.
d.
Align the slots in the phone to the
posts on the faceplate.
e.
Close until latched together.
f.
Align the battery door to the
grooves on either side of the
phone.
g.
Slide the battery door on while
pressing down firmly, ensuring that
the battery door clicks into place.
Check and repeat if the battery
door is not aligned. Do not force.
d
c
e