Kyocera FS-3140MFP FS-3140MFP Fax Operation Guide - Page 44
FAX Detail, TX Start Speed, 33600bps, Change
View all Kyocera FS-3140MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
FAX Operation (Basic) FAX Detail: TX Start Speed: 33600bps C b 3/ 4 [ Change ] 38 Use the Y or Z key to select [TX Start Speed] or [ECM] and change settings as necessary, and then press the OK key. Item Description TX Start Speed ECM To change the transmission start speed, change this setting. Select the speed from 33,600 bps, 14,400 bps, and 9,600 bps. ECM (error correction mode) is a function to automatically resend an image that has not been correctly sent or received due to the effects of noise on the telephone line during transmission. To change the ECM communication setting, change this setting. 39 Use the Y or Z key to check if each item was entered correctly. 40 Press the OK key. 41 Press the OK key again. 42 Use the Y or Z key to check if the destination was set correctly. 43 Press the OK key. The destination is added to the Address Book. Group Registration You can register several destinations that have been registered to be contacted as a unit. This method is convenient because several destinations can be designated at one time. Up to 20 groups can be registered. NOTE: Group registration requires destinations that have been registered as contact registration. Perform the necessary contact registration in advance. 1 Press the System Menu/Counter key. 2 Press the U or V key to select [Edit Destination]. 3 Press the OK key. 4 Press the U or V key to select [Addressbook]. 5 Press the OK key. 3-16