Kyocera KM-1650 Fax System (L) Operation Guide - Page 25
Setting the Current Date and Time (\, Remote Test ID
View all Kyocera KM-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax) Setting the Current Date and Time ("Date & Time" setting) Set the date and the time that will appear in the message display here. BE SURE that the date and time that you set here are correct since they will serve as a basis for all communications that use the timer. Notes • Prior to operation, check the message1 display to make sure that the operation panel is in the initial mode for fax operation. (See What is the "Initial Mode"? on page 1-13.) • If you want to cancel the procedure part way through, press the Reset key. 1 Open the cover plate to the left and press the Register key. 2 Press the S key or the T key to select Program Fax Parameter. Program: Program encryption box Program Encryption ID Program Fax Parameter 3 Press the Enter key. 4 Press the S key or the T key to select Date & Time [Date and Time]. Program Fax Parameter: Remote Switch :55 Remote Test ID :0000 Date & Time :13:12 5 Press the Enter key. 6 Use the keypad to enter the present date and time. If you want to advance the cursor to the next space, Date & Time:03-30-2004 13:29 simply press the > key. Set Date & Time If you want to clear the currently displayed date and time from the message display and enter it once again from the beginning, simply press the Stop/Clear key. 7 Press the Enter key. The setting of the time and date is complete. 8 Press the S key or the T key to select End and press the Enter key. To finish the setting and return to the initial mode settings, press the Reset key. 1-11