Kyocera KM-1650 Scan System (F) Operation Guide (Functions Edition) - Page 65
Subnet Mask, Default Gateway, DHCP/BOOTP, ARP/PING, Set up] - [Network], Host Name
View all Kyocera KM-1650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
System Setting [Set up] - [Network] • Host Name Register the host name of the scanner (up to 32 single-byte characters) in this field. • IP Address Register the IP address of the Scanner Interface Card in this field in the following form: XXX.XXX.XXX.XXX • Subnet Mask Register the subnet mask of the Scanner Interface Card in this field in the following form: XXX.XXX.XXX.XXX • Default Gateway Register the default gateway of the Scanner Interface Card in this field in the following form: XXX.XXX.XXX.XXX • DHCP/BOOTP The DHCP and BOOTP can be set to either "ENABLE" or "DISABLE". The factory default setting is "ENABLE". • RARP The RARP can be set to either "ENABLE" or "DISABLE". The factory default setting is "ENABLE". • ARP/PING The ARP/PING can be set to either "ENABLE" or "DISABLE". The factory default setting is "ENABLE". Page 2-13