Kyocera KM-3035 Printing System (U) Operation Guide (Functions Edition) - Page 24

4. Selecting the Printer Settings 4-4 Font selection/settings About the font selection/settings It is possible to perform font selection/settings for the 4 items shown in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. Item Available settings 1 Selecting the font Selects the font that will be used for printing. This setting is made by entering the ID of the desired font. To select a font that is already installed in the printer, enter "I###" (with the desired font ID entered in place of ###). To verify font IDs, print out a Font List by following the procedure in "(18) Font List print out". It is possible to select a font other than those already installed, such as those contained in the optional Memory Card. Optional font IDs such as "S###", etc., start with different letters according to the type of the font as shown below. S: Software font (download) M: Memory card font H: Hardware font H: RAM disk font O: Optional ROM font 2 Sets the character size and character pitch Selects the code set that will be used under each font. Size : 4.00 ~ 999.75 points Pitch : 0.44 ~ 99.99 cpi 3 Courier Allows you to select between "Regular" and "Dark (bold)". Regular Dark 4 Letter Gothic Allows you to select between "Regular" and "Dark (bold)". Regular Dark 5 Code set Selects the code set that will be used under each font. The code sets that are available for selection will differ depending upon the font. 6 Font List print out Remarks The font can be set separately for each interface. To select an installed font, select "Internal". To select a font other than those already installed, select "Option" and set the desired font. Either the character size or character pitch is displayed according to the font IDs. Displayed only when the "Internal" is selected. Displayed only when the "Internal" is selected. 4-12