Kyocera KM-3035 Printing System (U) Operation Guide (Functions Edition) - Page 28

4. Selecting the Printer Settings 4-5 Page Settings About the page settings It is possible to perform page settings for the 6 items shown in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. Item Available settings Remarks 1 Copiers (Number of copies) 001 - 999 2 (Orientation) Printing orientation Portrait, Landscape Allows you to set a different printing orientation for each interface. 3 Zoom (Printing reduction) Only the printing sizes that can be If Stock Form is set as the paper Originals can be reduced with a fixed ratio and printed out used with the selected paper size size, a ratio will change by selecting at a selected printing size by selecting the paper size are displayed. a different printing orientation. (original size) and the printing size. Allow you to select a ration of 98% Paper size: Cassette, 11 x 17, 8 1/2 x 14, 8 1/2 x 11, reduction as printing size. 5 1/2 x 8 1/2, A3, A4, A5, B4, B5, Folio, If the setting of "A4 ➔ 8 1/2 x 11 or 8 1/2 x 13, Stock Form. 8 1/2 x 11 ➔ A4" is selected, the original will be reduced with 94% ratio. 4 Page Protect Mode If "Auto" is selected here, the machine will monitor the data to avoid any Print Overrun Error and, if necessary, automatically turn Page Protect "On". If a Print Overrun Error does happen to occur even then, the machine will automatically change the Page protect setting to "On". Auto, On 5 LF (Linefeed) action LF only, CR and LF, Ignore LF Allows you to set a different linefeed handling for each interface. 6 CR (Carriage-Return action CR only, CR and LF, Ignore CR Allows you to set a different carriage return handling for each interface. 7 Wide A4 On/Off Increases the printing area on A4 size paper. Off, On 4-16