Kyocera KM-3035 Printing System (U) Operation Guide (Functions Edition) - Page 60

4. Selecting the Printer Settings 4-13 e-MPS settings NOTE: The optional hard disk must be installed in order to use all of the e-MPS function. NOTE: It is possible to use the [Proof and Hold] and [Stored job print out] of the e-MPS function when "On" is selected under the RAM disk On/Off setting (P4-24). For more information about e-MPS, refer to the KX Printer Drivers Operation Guide. About the e-MPS settings It is possible to perform e-MPS settings for the 6 items shown in the following chart. For the most efficient use of the printer functions, select the various settings according to your printing needs. Item Available settings Remarks 1 Quick copy print out Print out of a quick copy Prints out the print job that is designated for the "Quick Copy" or "Proof and Hold" setting in the printer driver. 2 Private print/Stored job print out Print out of private and stored jobs Prints out the print job that is designated for the "Private Print" or "Job Storage" setting in the printer driver. 3 Virtual Mailbox data print out Print out of data in the Virtual Mailbox Prints out the print job that is saved in the Virtual Mailbox which is designated for the "Virtual Mailbox (VMB)" setting in the printer driver. 4 Virtual Mailbox Data List print out Print out of the Virtual Mailbox List 5 Code Job List print out Print out of the Cod JOB List 6 e-MPS configurations Number of quick copy jobs, The following maximum size settings can be performed for temporary protection for code job the hard disk. size, permanent protection for • Temporary protection for code jobs code job size • Permanent protection for code jobs • Virtual Mailbox The maximum number of quick copy jobs to be registered can be set as well. 4-48