Kyocera KM-3050 Scan To SMB (PC) Setup Guide Rev-3

Kyocera KM-3050 Manual

Kyocera KM-3050 manual table of contents:

  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 1
    Scan to SMB(PC) Set up Guide
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 2
    ... modules developed by Independent JPEG Group. All other brands and product names are registered trademarks or trademarks of their respective companies. The designations ™ and ® will not be used in this Setup Guide.
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 3
    Introduction This Setup Guide explains operations on your computer and the machine that you must perform ...to digital data and send it to any computer on the network for saving. Flow of Processes for Data Transmission [...for storing data Domain name\ user name FTP Connection Test Password 10:10 Add...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 4
    ... Scan to SMB (PC) function, the machine must be connected to a TCP/IP network. NOTE: You can select from the following three file formats: PDF, TIFF, JPEG and XPS. To select a file format, refer to the Operation Guide. The next section explains how to send data to a domain controlled computer....
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 5
    ...-based computer, you must configure Windows Firewall exceptions. With exceptions, enable file ... to SMB (PC). IMPORTANT: Log on to Windows with administrator privileges. 1 On the Windows Firewall Settings dialog ... and click Allow a program through Windows Firewall. At the User Account Control consent...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 6
    ... is added to the list of the programs or ports. Click the OK button to close the Windows Firewall Settings dialog box. 7 NOTE: You can communicate using port 445 for ..., change SMB port number to 445 via the COMMAND CENTER. When you want to change port numbers, consult your network administrator. 4
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 7
    ... on drive C. NOTE: The following description is one example of screenshots of Windows XP. The details differ depending on the type of operating system. IMPORTANT: Log on to Windows with administrator privileges. 1 2 Create a folder named “scannerdata” on drive C. Right...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 8
    .... Everyone is the setting that allows any users to share the folder over the network. NOTE: Click the Add button to add groups or users that are .... Use this setting if you want to limit the access to the shared folder to specific users or groups. For further details, refer to Adding Users Who can ...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 9
    7 8 Click the Security tab, then click the Add button. Add the user name displayed in the Group or user names. Click the Add button, then click the Locations button. Select the computer to which the shared folder was created (Example: PC4050) and then click the OK button. Enter the user name added...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 10
    STEP 2: Checking Information Required to Specify Destination Check the computer information required to enter on the touch panel when sending a file. The information you require to check using the computer is Entry for [Host Name] Entry for [Path] Entry for [Login User Name] Checking the Entry ...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 11
    All characters in the Full computer name text box correspond to the entry for [Host Name]. (Example: PC4050) 9
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 12
    ... Companion, click Printers, Computers, or people, and then click A computer on the network. On the Computer name text box, type the name of computer (... [Path] is "share name\name of a folder in the shared folder". In the sample window above, "scannerdata\projectA" corresponds to [Path]. 10
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 13
    ... name\user name" format for logging onto Windows. 1 2 Press the Ctrl-Alt-Delete key ... Check the Logon Information that appears on the Windows Security window. In the sample window below, "ABCDNET\james.... User Name]. 1 2 Open the Command Prompt window. From the Start menu, select All Programs, ...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 14
    ... Example: pc4050 Name of folder for storing data Example: scannerdata page 8 of this Setup Guide page 10 of this Setup Guide [Path] [Login User Name] Domain name\user name Example: abcdnet\ james.smith page 11 of this Setup Guide [Login Password] Password to be entered when logging in...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 15
    ... you entered. If they are correct, refer to the Troubleshooting on Page 15. NOTE: Adding destinations to ... add destinations to the address book, refer to the Operation Guide. Ready to send. Place original. Folder Path... 1 pc4050 scannerdata abcdnet\ james.smith FTP Add to Addr Book Connection Test ...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 16
    ...doc" followed by additional information (by default, a timestamp). For example, a file containing data sent on December 31, 2008, 02:30:40 pm will be "doc20081231143040". You can also specify a name of file in [File Name Entry] before sending it. For details, refer to the Operation Guide. 14
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 17
    Troubleshooting If a network connection fails (ex. Send Error), refer to the table below. ...Enable SMB protocol setting. Refer to the Operation Guide. page 5 of this Setup Guide Refer to the Operation ...Guide page 11 of this Setup Guide page 13 of this Setup Guide Is the information entered in [Host ...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 18
    ...server. Refer to "Responding to Error Messages" in the Operation Guide. page 3 Is there a difference in time between ...Contact your system administrator. Refer to the Operation Guide. : You can also enter the login...: If you still cannot connect to the network after performing all of the above checks...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 19
    ... to close the New User dialog box. The new user is added to the list of the local users. Click (Close button) to close the Manage window. Set permissions for the shared folder. Right-click the folder to be shared, select Sharing and Security···, and click the Permissions button. Add the user that...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 20
    8 Enter the user name that was locally added in the text box and click the OK button. 9 Select the added user, and click the checkbox under Allow for Change and Read, and then click the OK button. 10 Click the Security tab, then click the Add button. 11 Add the user name displayed in the Group ...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 21
    13 Select the added user, click the checkbox under Allow for Modify and Read, then click the OK button. 14 Click the OK button to close the Permissions dialog box. 15 Send the file. For further details, refer to STEP 3: Sending File on page 12. 19
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 22
    ...computer Example: pc4050 Name of folder for storing data Example: scannerdata page 8 of this Setup Guide page 10 of this Setup Guide [Path] [Login User Name] [Login Password] Name of local user Example: james.smith Password of local user page 17 of this Setup Guide page 17 of this ...
  • Kyocera KM-3050 | Scan To SMB (PC) Setup Guide Rev-3 - Page 23
    Rev. 3 2008. 11



Type your new search above

The manual viewer requires the flash plugin to be installed and enabled.
To view this page ensure that Adobe Flash Player version 10 or greater is installed.

Kyocera KM-3050 Manual