LG 32LC2DA Operation Guide - Page 59
Programmin, the Remote
View all LG 32LC2DA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Reference Programmin the Remote i_ The remote control is a multi-brand or universal remote control It can be programmed remote-controHabte devices of other manufacturers. Note that the remote control may not control all models of other brands to operate most Test your remote control To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding MODE button (VCR) on the remote control, while i_luminating on the selected component Test the POWER button to see if the component responds properly. If not, the remote requires programming to operate the device. 2 Turn on the component to be programmed, ing MODE button on the remote control. then press the correspond- 3 Press the MENU and MUTE buttons simultaneously for 2 seconds, the button selected component lights on the remote control If you don't press any button for 20 seconds, the button set.ted component will turn off on the remote control. At a moment, you have to repeat from step 2 4 Enter a code number using the number buttons on the remote. When pressing the button, the light is blinked at a time. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off. 5 .Press the MENU button to store the code. After blinking twice, this code _s stored 6 Test the remote control functions to see if the component responds properly. If not, repeat from step 2. 59