LG 32LC2DA Operation Guide - Page 62

Reference Checklist The remote control doesn't work • Check to see if there is any object between the product and the remote control causing obstruction. • Are bakeries instaiied with correct polarity (+ to +, - to -)? • Correct remote operating mode set: TV, VCR etc,? • Install new batteries, Power is suddenly turned off * Is the sleep timer set? ° Check the power controt settings, Power interrupted . No broadcast on station tuned with Auto off activated. J No picture & No sound • Check whether the product is turned on, • Try another channel, The problem may be with the broadcast, • Is the power cord inserted into wait power outlet? • Check your antenna direction and/or location. ° Test the wall power out]eL plug another product's power cord into the outlet where the product's power cord was plugged in, Picture appears slowly after switching on ° This is normat, the image is muted during the product sta_up process Please contact your seP¢ice center, if the picture has not appeared after five minutes, No or poor color or poor picture • Adjust Color in menu option. ° Keep a sufficient: distance between the product and the VCR, • Try another channel. The problem may be with the broadcast. ° Are the video cables installed properly? • Activate any function to restore the brightness of the picture. HorizontalNertical bars or pic- ture shaking • Check for local interference such as an electrical appliance or power tool. Poor reception on some channels • Station or cable product experiencing problems, tune to another station, • Station signal is weak, reorient antenna to receive weaker station, ° Check for sources of possible interference. Lines or streaks in pictures ° Check antenna (Change the direction of the antenna). J 62