LG 32TNF5J-B Owners Manual - Page 69
Screen Protection Mode] does not work with the functions [TruMotion] / [Noise Reduction] / [MPEG Noise
View all LG 32TNF5J-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
ENGLISH 55 NOTE •• The [Tiling Type] and [Detail Settings] menu items are not available for models that do not support the tile mode. •• The [Screen Protection Mode] function is supported for external input images. -- The [Screen Protection Mode] function is not enabled for playing images in USB devices. -- The [Screen Protection Mode] function is not enabled when interlaces signals are input. •• [Screen Protection Mode] does not work with the functions [TruMotion] / [Noise Reduction] / [MPEG Noise Reduction]. -- To enable the functions [TruMotion] / [Noise Reduction] / [MPEG Noise Reduction] in the DTV input mode, ensure that the [Screen Protection Mode] menu is set to (Off). •• It is recommended to use contents with 10 minutes of playback time. (The [Screen Protection Mode] function may not work smoothly for the content with the duration longer than 10 minutes.) •• For the [Screen Protection Mode] feature to work normally, the Dithering feature should be turned OFF on the external input player or the graphics chip/card you are using. •• To enable the [Screen Protection Mode] feature in Video Wall, the screens must be connected to the same network through a LAN. However, some operations may not be available when the screens are connected to [LAN Daisy Chain]. In this case, we recommend using a router or network switch. •• If [Screen Protection Mode Settings] is all set and in operation, and the settings are changed or the [Screen Protection Mode] function is discontinued, the function restarts next time the product is turned on. -- To enable the [Screen Protection Mode] function, it needs time to recognize the pattern of the content. (The time may vary depending on the duration of the content.) •• The [Screen Shift] feature is supported only for the stand-alone configuration or for use in a single DP daisy chain. That is, if [Tile Mode] is enabled, the [Screen Shift] feature only works properly when the values of [Row] and [Column] in [Tile Mode Setting] are the same as those of [Row] and [Column] in [Detail Settings]. •• When [Content Luminance Compensation] is set to [High], there may be differences in brightness than when it is set to [Low]. •• Return to default settings by clicking [Admin] [Factory Reset]. •• When using the Screen Shift function, the location of the touched and operated area may be slightly different.