LG 37LD320H User Manual - Page 244

FTG Mode via CPU (Cont.) Teaching FMA Configuration to a TV This procedure describes how to "Teach" an FMA Configuration file from a USB memory device to a TV. Ensure you have completed the procedure on the previous page to create the FMA Configuration file before proceeding with the steps below. Caution: If the TV EBL is already in FTG Mode, you cannot use this procedure to make changes to the FTG Channel Map and FTG Installer Menu settings. You must use a direct PC-to-TV connection as described on page 35 or an FMA head end device to reconfigure the EBL. 1. Plug the USB memory device that contains the FMA Configuration file into the Target LD340H/LD345H TV USB IN port. 2. Press MENU to display the TV setup menus, use the arrow navigation keys to select/highlight either the Option (if TV is in Pass-through Mode) or Lock (if TV is already in FTG Mode) menu icon, and then press the number "7" key a total of seven times to display the USB Download Menu. USB Download Menu Upgrade TV Software Upgrade PTC Software Teach To TV (TLL) Teach To TV (FMA) Return Enter 3. Use the Up/Down arrow keys to select Teach To TV (FMA), and then press ENTER. 4. Use the Up/Down arrow keys to select the FMA Configuration file you want to install, and then press ENTER. The TV will show Teaching completion progress in a new window. Do NOT remove the USB device until Teaching is complete. When Teaching is complete, the TV will tune to the first logical channel in the FTG Channel Map. 5. When Teaching is done, remove the USB memory device. The FMA Configuration should be resident on the Target TV. Also, the Target TV CPU is now in FTG Mode (if it was previously in Pass-through Mode). Teach To TV (FMA) xx0BAL-PLAT200001.FMA Return ! Teach To TV UPDATING... Do not unplug! Enter 50% 32 206-4186