LG 37LD320H User Manual - Page 260
Resetting a TV to Pass-through Mode, FTG Mode via CPU
View all LG 37LD320H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
Resetting a TV to Pass-through Mode This section describes how you can reset a TV that is currently in FTG Mode to Pass-through Mode. Note that the reset to Pass-through Mode will also restore all factory default settings on the TV. FTG Mode via CPU There are three options for resetting Pass-through Mode on TVs that are in FTG Mode via the CPU. The first and second options enable you to reset a single TV to Pass-through Mode, while the third option enables you to reset multiple TVs to Pass-through Mode at one time. • A predefined value for Installer Menu item 117 FACT DEFAULT enables access to initiate a factory "IN- STOP" process that will reset the TV to Pass-through Mode. Contact technical support for the required value for Installer Menu item 117 and for additional information on performing the IN-STOP from the Installer Menu. • Using a USB memory device, "Teach" an FMA Configuration file that only contains a "0 Mapped Channels" FTG Channel Map to the TV. Refer to "Creating an FMA Configuration File using the FTG Configuration Application" and "Teaching FMA Configuration to a TV" on pages 31 and 32, respectively, for further information. • If your system uses a Pro:Centric server for configuration, use the Pro:Centric Admin Client to load an FMA Configuration file that only contains a "0 Mapped Channels" FTG Channel Map on the Pro:Centric server. Refer to the Pro:Centric™ Server Admin Client User Guide for further information. FTG Mode via EBL There are three options for resetting Pass-through Mode on TVs that are in FTG Mode via the EBL. The first and second options enable you to reset a single TV to Pass-through Mode, while the third option enables you to reset multiple TVs to Pass-through Mode at one time. • A predefined value for Installer Menu item 117 FACT DEFAULT enables access to initiate a factory "IN- STOP" process that will reset the TV to Pass-through Mode. Contact technical support for the required value for Installer Menu item 117 and for additional information on performing the IN-STOP from the Installer Menu. • Using a direct PC-to-TV connection, "Write" an unpopulated Channel Map-that is, a Channel Map with zero channels-to the TV. Refer to the "FTG Mode via EBL" procedure on page 35 and/or the Free-ToGuest (FTG) Configuration Application manual for further information. • If your system uses an FMA for broadcast configuration, configure the FMA device with an FMA Configuration file that only contains a "0 Mapped Channels" FTG Channel Map to broadcast to the TV EBL(s). Refer to the Free-To-Guest (FTG) Configuration Application manual and/or the Installation & Setup manual for the FMA device for further information. 48 206-4186