LG L1404R Service Manual - Page 9

Cabinet Installation 1. Open the window. Mark a line on the center of the window stool between the side window stop moldings. Loosely attach the sill bracket to the support bracket using the carriage bolt and the lock nut. 2. Attach the sill bracket to the window sill using the screws (Type B). Carefully place the cabinet on the window stool and align the center mark on the bottom front with the center line marked window stool. 3. Using the M-screw and the lock nut, attach the support bracket to the cabinet track hole. Use the first track hole after the sill bracket on the outer edge of the window sill. Tighten the carriage bolt and the lock nut. Be sure the cabinet slants outward. CAUTION: Do not drill a hole in the bottom pan. The unit is designed to operate with approximately 1/2" of water in bottom pan. 4. Pull the bottom window sash down behind the Top retainer bar until they meet. NOTICE 1. Do not pull the window sash down so tightly that the movement of Frame curtain is restricted. Attach the cabinet to the window stool by driving the screws (Type B) through the cabinet into window stool. 2. The cabinet should be installed with a very slight tilt downward toward the outside. Installation Sill Bracket Carriage Bolt (M-Screw) Figure 2 Cabinet Track hole Support Bracket Carriage bolt and lock nut Figure 3 Support Bracket Lock nut Machine screw (Type D) and lock nut Outer edge of window sill Screw(Type B) Sill bracket Top retainer bar Figure 4 Window stool Front angle Window sash Top retainer bar Foam-PE Cabinet Frame curtain Foam-PE Figure 5 Sash track Figure 6 Front Angle Screw(Type B) Service Manual 9