LG LBC24360ST Service Manual - Page 6

Disassembly - parts

Page 6 highlights

3. DISASSEMBLY 3-1 REMOVING AND REPLACING REFRIGERATOR 3-2 DOOR DOOR ● Door Gasket Removal To remove and replace the refrigerator door: CAUTION: Before you begin, remove food and bins from the doors. 1. Remove gasket Pull gasket free from gasket channel on the four remaining sides of door. (1) (1) (2) • Open the door. Remove the top hinge cover screw (1) and lift ● Door Gasket Replacement up the cover(2). 1. Insert gasket into channel • Remove the cover. • Using 10mm or 13/32-inch socket wrench, remove the 3 bolts and lift off the Top Hinge(3). Set parts aside. Press gasket into channels on the four remaining sides of door. IMPORTANT : When removing the bolts, be careful that the door does not fall forward. • Lift the door from the middle hinge pin and remove the door. • Place the door, inside facing up, on a non-scratching surface. • Replace in the reverse order. WARNING Explosion Hazard Disconnect electrical supply to the refrigerator before installing. Failure to do so could result in death or serious injury. Do not put hands or feet or other objects into the air vents, base grille, or bottom of the refrigerator. You may be injured or receive an electrical shock. Be careful when you work with the hinge, base grille, and stopper. You may be injured. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

3. DISASSEMBLY
3-1
REMOVING AND REPLACING REFRIGERATOR
To remove and replace the refrigerator door:
CAUTION:
Before you begin, remove food and
bins from the doors.
WARNING
Explosion Hazard
Disconnect electrical supply to the refrigerator before
installing. Failure to do so could result in death or
serious injury.
Do not put hands or feet or other objects into the air
vents, base grille, or bottom of the refrigerator.
You may be injured or receive an electrical shock.
Be careful when you work with the hinge, base grille,
and stopper. You may be injured.
• Open the door. Remove the top hinge cover screw (1) and lift
up the cover(2).
• Remove the cover.
• Using 10mm or 13/32-inch socket wrench, remove the 3 bolts
and lift off the Top Hinge(3). Set parts aside.
: When removing the bolts, be careful that the
door does not fall forward.
• Lift the door from the middle hinge pin and remove the door.
• Place the door, inside facing up, on a non-scratching surface.
• Replace in the reverse order.
IMPORTANT
1. Remove gasket
Pull gasket free from gasket channel on the four
remaining sides of door.
3-2 DOOR
Door Gasket Removal
Door Gasket Replacement
1. Insert gasket into channel
Press gasket into channels on the four remaining
sides of door.
DOOR
(1)
(1)
(2)
6