LG LDCS24223S Owners Manual - Page 32

ENGLISH 31 INSTALLATION Leveling and Door Alignment Leveling After installing, plug the refrigerator's power cord into a 3-prong grounded outlet and push the refrigerator into the final position. Your refrigerator has two front leveling legs- one on the right and one on the left. Adjust the legs to alter the tilt from front-to-back or sideto-side. If your refrigerator seems unsteady, or you want the doors to close more easily, adjust the refrigerator's tilt using the instructions below: 1 Turn the leveling leg to the left to raise that side of the refrigerator or to the right to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator. Door Alignment If the space between your doors is uneven, follow the instructions below to align the doors. 1 Remove the top hinge cover screws. Lift the hook located at the bottom of the front side of the cover with a flat-head screwdriver. 2 Loosen the top hinge bolts using a 10mm or 13/32 in. socket wrench or open-end wrench. 3 Have someone hold the refrigerator door so the space between the two door is even, and retighten the top hinge bolts. 4 Replace the top hinge cover. NOTE A flare nut wrench works best, but an open-end wrench will suffice. Do not over-tighten. 2 Open the doors again and check to make sure that they close easily. If the doors do not close easily, tilt the refrigerator slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and you should turn both leveling legs the same amounts.