LG LDCS24223S Owners Manual - Page 35

Turning the Automatic Icemaker, On or Off

Page 35 highlights

HOW TO USE 34 ENGLISH Automatic Icemaker (Freezer Room) (Ice maker installed only) * Depending on the model, some of the following functions may not be available. Ice is made in the automatic icemaker and sent to the dispenser. The icemaker will produce 12 cubes per cycle-approximately 100 cubes in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other operating conditions. . It takes about 12 to 24 hours for a newly installed refrigerator to begin making ice. . The water pressure must be between 20 and 120 psi (0,14 y 0,82 MPa) on models without to produce the normal amount and size of ice cubes. . Foreign substances or frost on the ice- detecting sensor can interrupt ice production. Make sure the sensor area is clean at all times for proper operation. Automatic Shut Off Arm Power Switch Turning the Automatic Icemaker On or Off icemaker switch to OFF (O) . To turn on the automatic icemaker, set the switch to ON (I) .

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

34
HOW TO USE
A
(Ice maker installed only)
utomatic Icemaker (Freezer Room)
* Depending on the model, some of the
following functions may not be available.
Ice is made in the automatic icemaker and sent
to the dispenser. The icemaker will produce
12 cubes per cycle—approximately 100 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other operating
conditions.
It takes about 12 to 24 hours for a newly
.
installed refrigerator to begin making ice.
The water pressure must be between 20 and
.
120 psi (0,14 y 0,82 MPa) on models without
to produce the normal amount and size of ice
cubes.
Foreign substances or frost on the ice-
.
detecting sensor can interrupt ice production.
Make sure the sensor area is clean at all times
for proper operation.
Turning the Automatic Icemaker
On or Off
icemaker switch to
OFF (O)
. To turn on the
automatic icemaker, set the switch to
ON (I)
.
Automatic
Shut Off Arm
Power Switch
ENGLISH