LG LDCS24223S Owners Manual - Page 42

Adjusting the Refrigerator, Shelves

Page 42 highlights

ENGLISH 41 HOW TO USE Adjusting the Refrigerator Shelves The shelves in your refrigerator are adjustable to meet your individual storage needs. Your model may have full or split shelves. want easier. Doing so will also reduce the amount of time the refrigerator door is open which will save energy. Detaching the Split Shelf (Half Shelf Type) Tilt up the front of the shelf and then lift the shelf straight up. Pull the shelf out. Assembling the Split Shelf (Half Shelf Type) Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height. Then, lower the front of the shelf so that the hooks drop into the slots. Assembling the Full Shelf (Full Shelf Type) Slide the shelf into the guides until it stops. Detaching the Full Shelf (Full Shelf Type) Tilt up the back of the shelf and pull the shelf out. WARNING Make sure that shelves are level from one side to the other. Failure to do so may result in the shelf falling or spilling food. WARNING . Do not clean glass shelves with warm water while they are cold. Shelves may break if exposed to sudden temperature changes or impact. . Glass shelves are heavy. Use special care when removing them.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

41
HOW TO USE
Adjusting the Refrigerator
Shelves
The shelves in your refrigerator are adjustable
to meet your individual storage needs. Your
model may have full or split shelves.
want easier. Doing so will also reduce the
amount of time the refrigerator door is open
which will save energy.
D
(Half Shelf Type)
etaching the Split Shelf
Tilt up the front of the shelf and then lift the
shelf straight up. Pull the shelf out.
A
(Half Shelf Type)
ssembling the Split Shelf
Tilt the front of the shelf up and guide the shelf
hooks into the slots at a desired height. Then,
lower the front of the shelf so that the hooks
drop into the slots.
D
(Full Shelf Type)
etaching the Full Shelf
Tilt up the back of the shelf and pull the shelf
out.
A
(Full Shelf Type)
ssembling the Full Shelf
Slide the shelf into the guides until it stops.
WARNING
Do not clean glass shelves with
warm water while they are cold.
Shelves may break if exposed to
sudden temperature changes or
impact.
Glass shelves are heavy. Use special
care when removing them.
WARNING
Make sure that shelves are level from
one side to the other. Failure to do so
may result in the shelf falling or spilling
food.
ENGLISH
.
.