LG LSE4615ST Owners Manual - Page 23

Timer On/Off The Timer On/Off serves as an extra timer in the kitchen that beeps when the set time has run out. It does not start or stop cooking. The Timer On/Off feature can be used during any of the oven control functions. Setting the Timer (for example to set 5 minutes) 1 Set the oven mode knob to the Off position. 2 Press the Timer On/Off. 0:00 with HR inside it appears and Timer flashes in the display. 3 Press plus(+) or minus(-) to set the desired time. Plus(+) to increase the time and minus(-) to decrease the time. 4 Press Timer On/Off or Start to start the Timer. The remaining time countdown appears in the display. NOTE If Timer On/Off is pressed, the timer returns to the time of day. 5 When the set time runs out, End shows in the display. The indicator tones sound every 15 seconds until Timer On/Off is pressed. NOTE •• If the remaining time is not in the display, recall the remaining time by pressing Timer On/Off. •• Press Timer On/Off twice to set the time in minutes and seconds. •• Press Timer On/Off once to set the time in hours and minutes. Canceling the Timer before the set time has run out 1 Press Timer On/Off once. The display returns to the time of day. Wi-Fi The Wi-Fi button is used to connect the appliance to a home Wi-Fi network. 1 Set the oven mode knob to the Off position. 2 Press and hold Timer On/Off for 3 seconds. 3 The power on chime sounds, SEt appears in the display, and the Wi-Fi icon ( ) blinks. 4 Register the appliance on the Wi-Fi network using the smart phone app. 5 To disconnect the appliance from the network, delete it from the registered appliances in the app. NOTE See the Smart Functions section in the owner's manual for more details. OPERATION 23 Settings Set the oven mode knob to the Off position. Press and hold Start Time for three seconds(LSE4615 model only) or press Setting key repeatedly to toggle through and change oven settings. The Setting key allows you to: •• set the hour mode on the clock (12 or 24 hours) •• enable/disable convection auto conversion •• adjust the oven temperature •• activate/deactivate the preheating alarm light •• set the beeper volume •• switch the temperature scale between Fahrenheit and Celsius •• cooktop on alert Setting the Hour Mode The control is set to use a 12-hour clock. To reset the clock to 24-hour mode, follow the steps below. 1 Set the oven mode knob to the Off position. 2 Press Setting. 3 Press plus(+) or minus(-) to set the desired hour mode on the clock. 4 Press Start to accept the desired change. Setting Convection Auto Conversion When Conv. Bake and Conv. Roast are selected, Convection Auto Conversion automatically converts the standard recipe temperature entered to a convection temperature by subtracting 25 °F / 14 °C. This auto-converted temperature shows on the display. For example, select Conv. Bake, enter 350 °F, and 325 °F shows on the display after preheat. Convection Auto Conversion is enabled by default. To change the setting, follow these instructions. 1 Set the oven mode knob to the Off position. 2 Press and hold Start Time for three seconds(LSE4615 model only) or press Setting repeatedly until Auto appears in the display. 3 Press plus(+) or minus(-) to enable or disable the feature. 4 Press Start to accept the change. ENGLISH