LG LSE4615ST Owners Manual - Page 55
Convection Fan stops
View all LG LSE4615ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
TROUBLESHOOTING 55 ENGLISH Symptoms Food does not broil properly Oven temperature too hot or too cold Scratches or abrasions on cooktop surface Metal marks Brown streaks or specks Areas of discoloration on cooktop Oven will not Self Clean * "Crackling" or "popping" sound Fan noise Convection Fan stops Displayed colon in the clock is flashing Excessive smoking during a Self Clean cycle * Possible Causes / Solutions •• Aluminum foil used on the broiling pan and grid has not been fitted properly and slit as recommended. - See the Using the Oven section. •• In some areas the power voltage may be low. - Preheat the broil element for 5-7 minutes. - See the Broiling Guide. •• Oven sensor needs to be adjusted. - See Oven Temperature Adjustment in the Features section. •• Coarse particles such as salt or sand between cooktop and utensils can cause scratches. Be sure the cooktop surface and bottoms of utensils are clean before using. Small scratches do not affect cooking and will become less visible with time. •• Cleaning materials not recommended for glass-ceramic cooktop have been used. See Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE section. •• Cookware with rough bottom has been used. Use smooth, flat-bottomed cookware. •• Scraping of metal utensils on cooktop surface. Do not slide metal utensils on cooktop surface. Use a glass-ceramic cooktop cleaning creme to remove the marks. See Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE section. •• Boilovers are cooked onto surface. Use a blade scraper to remove soil. See Cleaning the Glass-Ceramic Cooktop in the MAINTENANCE section. •• Mineral deposits from water and food. Remove using a glass-ceramic cooktop cleaning creme. Use cookware with clean, dry bottoms. •• The oven temperature is too high to set a Self Clean operation. - Allow the range to cool and reset the controls. •• Oven controls improperly set. - See the Self Clean section. •• A Self Clean cycle cannot be started if the oven lockout feature is active. •• This is the sound of the metal heating and cooling during both the cooking and Self Clean functions. - This is normal. •• A convection fan may automatically turn on and off. - This is normal. •• Convection fan stops during a convection bake cycle. - This is normal and is done to allow for more even heating during the cycle. This is not a failure of the range and should be considered normal operation. •• This is normal. This means that the product has just been plugged in, or that it has experienced a power interruption. Press Cook Time for three seconds and reset the clock, or press any key to stop the flashing. •• Excessive soil. - Turn the oven mode knob to the Off position. Open the windows to rid the room of smoke. Wait until the Self Clean mode is cancelled. Wipe up the excess soil and reset the clean. * For Model : LSE4615 / LSE4613