LG LTG4715BD Owners Manual - Page 29

Adjusting the Oven Temperature Your new oven may cook differently from the one it replaced. Use your new oven for a few weeks to become more familiar with it before changing the temperature settings. If after familiarizing yourself with the new oven, you still think that it is too hot or too cold, you can adjust the oven thermostat yourself. NOTE To begin, either raise or lower the thermostat 15 °F (8 °C). Try the oven with the new setting. If the oven still needs adjustment, raise or lower the thermostat again, using the first adjustment as a gauge. For example, if the adjustment was too much, raise or lower the thermostat 10 °F (5 °C). If the adjustment was not enough, raise or lower the thermostat 20 °F (12 °C). Proceed in this way until the oven is adjusted to your satisfaction. 1 Press and hold Start Time for three seconds. Then press Start Time repeatedly until U_AJ or L_AJ appears in the display. 2 To increase the temperature, press plus (+) until the desired amount appears in the display. To decrease the temperature, press minus (-) until the desired amount appears in the display. 3 Press Start to accept the change. NOTE •• This adjustment does not affect the broiling or Self Clean temperatures. The adjustment is retained in memory after a power failure. The oven temperature can be increased (+) or decreased (-) as much as 35 °F or 19 °C. •• Once the temperature is increased or decreased, the display shows the adjusted temperature until it is readjusted. Turning the Preheat Alarm Light On/Off When the oven reaches its set-temperature, the preheating alarm light flashes 5 times or until the oven door is opened. You can activate or deactivate the preheating alarm light. 1 Press and hold Start Time for three seconds. Then press Start Time repeatedly until PrE appears in the display. 2 Press plus(+) or minus(-) to turn the function on/off. 3 Press Start to accept the change. OPERATION 29 Adjusting the Beeper Volume 1 Press and hold Start Time for three seconds. Then press Start Time repeatedly until BEEP appears in the display. 2 Press plus(+) or minus(-) to select Hi, Lo or Off. 3 Press Start to accept the change. Selecting Fahrenheit or Celsius Set the oven temperature display to show either Fahrenheit (°F) or Celsius (°C) units. The oven defaults to Fahrenheit unless changed by the user. 1 Press and hold Start Time for three seconds. Then press Start Time repeatedly until Unit appears in the display. 2 Press plus(+) or minus(-) to select F(Fahrenheit) or C(Celsius). 3 Press Start to accept the change. Lock Out The Lock Out feature automatically locks the oven door and prevents most oven controls from being turned on. It does not disable the clock, timer or the interior oven light. 1 Press and hold Lower CLEAR/OFF for three seconds. 2 The lock melody sounds, Loc appears in the display, and the lock icon blinks in the display. 3 Once the oven door is locked, the lock indicator stops blinking and remains on. 4 To deactivate the Lock Out feature, press and hold Lower CLEAR/OFF for three seconds. The unlock melody sounds and the door and the controls unlock. ENGLISH