LG M2280D-PU Owner's Manual - Page 117

PROGRAMMING THE REMOTE CONTROL The remote is a multi-brand or universal remote. It can be programmed to operate most remotely controlled devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a Code into the Remote 1 Test your remote control. To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding mode button (such as a DVD or VCR) on the remote control, while pointing at the component. Test the POWER and CH ꕭꕮ buttons to see if the component responds properly. If not, the remote requires programming to operate the device. 2 Turn on the component to be programmed, then press the corresponding mode button (e.g. VCR or DVD) on the remote control. The remote control button of the desired device is lights up. 3 Press MENU and MUTE simultaneously, and then remote control is ready to be programmed with the code. 4 Enter a code using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off. 5 Press MENU to store the code. 6 Test the remote control functions to see if the component responds properly. If not, repeat the process from step 2. PROGRAMMING CODES DVD Brand Codes APEX DIGITAL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNAVOX 013 MARANTZ 024 MITSUBISHI 002 Brand NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN RCA SAMSUNG Codes 023 008 017 003 009 013 004 026 021 005 006 005 006 011 015 Brand SONY THOMPSON TOSHIBA YAMAHA ZENITH Codes 007 005 006 019 008 009 018 010 016 025 APPENDIX 117