LG M2280D-PU Owner's Manual - Page 58

PICTURE CONTROL Auto Configure (RGB-PC Mode Only) Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. Auto Configure This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress. 1. Using OSD PICTURE Move Enter u • Contrast 100 • Brightness 50 • Sharpness 50 • Color 50 • Tint 0 • Advanced Control • Picture Reset SSccrreeeenn((RRGGBB--)PPCC) ꔋ ➩ SCREEN Resolution Auto Config. s Position Size Phase Reset Move Prev. To Set Yes No PICTURE CONTROL 1 MENU 2 Enter 3 Enter 4 Enter Select PICTURE. Select Screen (RGB-PC). Select Auto Config. Select Yes. • If the position of the image is still not correct, try Auto adjustment again. • If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the Position, Size or Phase. 5 Enter Run Auto Config. • Press MENU or EXIT to close the menu window. • Press BACK to move to the previous menu screaen. 2. Using Auto Config. (Remocon) This function is available for RGB signals only. 1 Press Auto Config. Auto in progress 1 Press Auto Config. Auto in progress 58 ! Auto in progress For optimal display change resolution 1600 x 900 ! Auto in progress For optimal display change resolution 1920 x 1080