LG R975GM Owners Manual - Page 16

16 OPERATION Remote Control a Power Button b Mode Button c Start/Stop Button d Repeat Button e Language Button f a Lock Button g Smart Diagnosis Button h Mute Button i Smart Turbo Button j Directional Buttons k Turbo Button l Home Button NOTE •• The a Lock button will lock the 3D camera sensor. •• The Power button will only operate when the main power switch is turned on. •• The Language button will only operate when the robot cleaner is charging on the home station. Choosing a Cleaning Mode Getting Started Select a cleaning mode on the control panel or on the remote control. 1 Insert the power plug of the home station into a power outlet. 2 Press the Mode g button to select the desired mode as follows. ••b: Edge mode ••c: Zigzag mode ••d: Spiral Spot mode 3 Press the Start/Stop button v to start cleaning. NOTE •• The selected mode displays on the control panel. •• To change the cleaning mode during operation, press the Start/Stop button to stop the robot cleaner and then select another cleaning mode. •• Once selected, the new cleaning mode is retained even after the power supply is turned off. (For the Edge and the Zigzag modes only.) •• The robot cleaner utilizes AI (Artificial Intelligence) technology in the Edge and Zigzag modes. −−The 3D DUAL Eye is included with the 3D camera sensor and 3D obstacle detection sensor. The robot cleaner learns where to go and identifies objects it needs to avoid. −−The robot cleaner detects obstacles using the 3D DUAL Eye and remembers the locations of objects in the area being cleaned. −−The obstacle detection sensor of the 3D DUAL Eye may not operate normally if there is a human shape or something similar within the environment. −−When the Smart Turbo function is selected, the robot cleaner automatically detects dust, carpets or corners and adjusts the suction power when cleaning.