LG R975GM Owners Manual - Page 29
Cleaning the Sensors and the, Charging Terminals, WARNING, CAUTION
View all LG R975GM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
ENGLISH Cleaning the Sensors and the Charging Terminals 1 Place a soft cloth on the floor and place the robot cleaner on top of the cloth. 2 Clean the 3D DUAL Eye of the robot cleaner using a soft cloth. ••Be careful not to scratch the sensors. MAINTENANCE 29 4 Clean the dust sensors on the robot cleaner using a soft cloth. 5 Unplug the power cord of the home station and clean the charging terminals of the home station. 3 Turn the robot cleaner over and clean the cliff detection sensors a and the charging terminals b using a cotton swab or a soft cloth. WARNING •• Pull out the power plug before cleaning the charging terminals of the home station. Failure to do so may cause an electric shock or injury. CAUTION •• If the sensors or the charging terminals are damaged, discontinue use and contact an LG Electronics Customer Information Center. •• Do not wipe the product with a volatile solvent or an organic solvent (thinner, solvent, acetone, etc.) Doing so will cause product damage. NOTE •• It is very important that the cliff sensors are cleaned regularly to allow the robot cleaner to detect surface level differences and prevent it from falling over edges.