LG R975GM Owners Manual - Page 25
MAINTENANCE, Regular Cleaning
View all LG R975GM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
MAINTENANCE Regular Cleaning Before Cleaning the Robot Cleaner •• Turn off the main power switch before cleaning the robot cleaner. •• In order to maintain the optimum suction power of the robot cleaner, the dust bin, filters, and brush should be cleaned at least once a month. •• If the dust bin is completely full of dust or the filters are clogged, the suction power may be reduced. •• If the brush contains foreign substances, the brush may not spin or a noise may occur during operation. •• The filters will eventually need to be replaced. To purchase replacement filters, call an LG Electronics Customer Information Center or visit www.lg.com CAUTION •• Be sure to install the filter on the dust bin. If the filter is not installed, the dust will get into the motor inside the robot cleaner and will cause damage to the suction motor. Cleaning the Dust Bin 1 Press the top cover release (PUSH) button a to open the top cover, and pull the dust bin upward. MAINTENANCE 25 2 Press the dust bin release (PUSH) button b to open the dust bin cover and empty the dust bin. 3 Remove any foreign substances on the rubber at the bottom of the dust bin. 4 Use a dry cloth to rotate the end of the cyclonic mesh filter c to the unlocked position l and remove the filter. ENGLISH