LG WKEX200HWA Owners Manual - Page 25
Final Installation Check
View all LG WKEX200HWA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
ENGLISH beneath the appliance should not exceed 1 inch, and all 4 leveling feet must rest firmly on the floor. 1" 2 Adjust the leveling feet. • Turn all 4 leveling feet in one direction to raise the appliance or the other direction to lower it. INSTALLATION 25 Using Non-Skid Pads If you install the appliance on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, install the nonskid pads under the leveling feet and adjust the level. 1 Clean the floor to attach the non-skid pads. • Use a dry rag to remove and clean foreign objects or moisture. If moisture remains, the non-skid pads may slip. 2 Adjust the level after placing the appliance in the installation area. 3 Place the adhesive side c of the non-skid pad on the floor. • It is most effective to install the non-skid pads under the front leveling feet. If it is hard to place the pads under the front leveling feet, place them under the back leveling feet. 3 Check the level again. • Push or rock the top edges of the appliance gently to make sure the appliance does not rock. If the appliance rocks, readjust the leveling feet. 4 Tighten the locknuts b. • Turn the locknuts counterclockwise and tighten them when the appliance is level. a This side up b Remove backing 4 Recheck the appliance's levelness. • Push or rock the top edges of the appliance gently to make sure the appliance does not rock. If the appliance rocks, level the appliance again. WARNING • Do not raise the front of the appliance with a wood block or similar object. Doing so can cause serious injury or death. Final Installation Check Connecting the Washer to the Power Supply Plug the washer into a 120 VAC, 60 Hz grounded 3prong outlet. WARNING • Do not use a worn or damaged power cord or power plug. Replace or repair it immediately. Failure to do so may result in death, fire, electric shock, or malfunction.