LG WKHC202HBA Owners Manual - Page 42

42 MAINTENANCE 3 After drying both inner filters completely reassemble the small filter by sliding the tabs at each side into the grooves on the large filter. Close the filter assembly by folding the sides back together and snapping them closed in the center. • Ensure the left and right sides of the inner filter assembly are closed properly. 5 Remove the residual lint with a vacuum cleaner or by washing under running water. • If washed, allow the filter to dry completely before use. Failure to do so may cause an odor. CAUTION • Do not tap the filter repeatedly as the built in magnet may dislodge and cause a malfunction. 4 Insert the inner filter assembly into the outer filter. Cleaning the Outer Filter 1 Remove the dust or lint around the filter inlet. CAUTION • If the lint drops into the filter inlet, it may affect the drying performance and increase drying time. 6 Reassemble the filters and reinsert them. CAUTION • Do not load or remove any clothes when the lint filter is not in place. The clothes can drop into the filter inlet and may cause the appliance to malfunction. • For best results, always use all 3 parts of the 3piece filter. 2 Pull out the outer filter. 3 Remove the inner filter. 4 Open the outer filter by grasping the top edge and unfolding the sides. Using Drum Care Feature Run the Drum Care cycle periodically to prevent unpleasant odors in the drum. CAUTION • Remove all of the clothes from the appliance. 1 Turn on the appliance. 2 Launch the LG ThinQ application and select the Drum Care cycle in the Cloud cycle. 3 Press the Start/Pause button. • This function operates for about 3 hours.