LG WKHC202HBA Owners Manual - Page 79
Three-Wire Power Cord
View all LG WKHC202HBA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
ENGLISH a Ground Wire 2 Remove the terminal block access cover on the upper back of the appliance. 3 Install UL-listed strain relief into the power cord through-hole. 4 Thread the 4-wire #10 AWG minimum copper power cable prepared in step 1 through the strain relief. a b c a Terminal Block b UL-Listed Strain Relief c UL-Listed 4-Wire Power Cord 5 Transfer the appliance's ground wire from behind the green ground screw to the center of the terminal block. 6 Attach the two hot leads (black and red) of the power cord to the outer terminal block screws. 7 Attach the neutral (white) wire to the center screw of the terminal block. 8 Attach the power cord ground wire to the green ground screw. 9 Tighten all screws securely. 10 Reinstall the terminal block access cover. INSTALLATION 15 bc b e a d a White Wire moved from Ground Screw b Hot Leads of Power Cord (Black and Red) c Neutral Wire (White) d Power Cord Ground Wire e Ground Screw (green) Three-Wire Power Cord • A 3-wire connection is NOT permitted on new construction after January 1, 1996. • A UL-listed strain relief is required. • Use a 30-amp, 240-volt, 3-wire, UL-listed power cord with #10 AWG-minimum copper conductor and closed loop or forked terminals with upturned ends. 1 Remove the terminal block access cover on the upper back of the appliance. 2 Install the UL-listed strain relief into the power cord through-hole. 3 Thread a 30-amp, 240 volt, 3-wire, UL-listed power cord with #10 AWG-minimum copper conductor through the strain relief. a Terminal Block b UL-Listed Strain Relief c UL-Listed 3-Wire Power Cord