LG WKHC202HBA Owners Manual - Page 84
Using the Laundry Tub to Drain, Leveling the Appliance
View all LG WKHC202HBA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
20 INSTALLATION 2 Insert the end of the drain hose into the standpipe. 2 Hang the end of the drain hose over the side of the laundry tub. 3 Use the provided tie strap b to secure the drain hose in place. 3 Use the provided tie strap to secure the drain hose in place. 4 If the water valves and drain are built into the wall, fasten the drain hose to one of the water hoses with the provided tie strap c (ribbed side on inside). 24 - 96 " (61 - 244 cm) 24 - 96 " (61 - 244 cm) Using the Laundry Tub to Drain 1 Clip the end of the hose for washer into the elbow bracket. Leveling the Appliance The drum of the washer spins at very high speeds. To minimize vibration, noise, and unwanted movement, the floor must be a solid, level surface. CAUTION • Using the appliance without leveling it may cause excess vibration and noise, leading to an appliance malfunction. • Adjust the leveling feet only as far as necessary to level the appliance. Extending the leveling feet more than necessary can cause the appliance to vibrate. NOTE • Before installing the appliance, make sure that the floor is clean, dry and free of dust, dirt, water and oil so the appliance feet cannot slide easily.