LG WKHC202HBA Owners Manual - Page 86

Final Installation Check, Connecting the Washer to the Power Supply, Testing the Washer

Get LG WKHC202HBA PDF manuals and user guides View all LG WKHC202HBA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

22 INSTALLATION rock. If the appliance rocks, level the appliance again. Final Installation Check Connecting the Washer to the Power Supply Plug the washer into a 120 VAC, 60 Hz grounded 3prong outlet. WARNING • Do not use a worn or damaged power cord or power plug. Replace or repair it immediately. Failure to do so may result in death, fire, electric shock, or malfunction. • Do not modify the power cord and plug provided with the appliance. Do not damage it when installing or moving the appliance. Doing so may result in death, fire, electric shock, or malfunction. • Make sure that the appliance is grounded. • Connect this appliance to a grounded outlet conforming to the rating prior to use. Failure to do so may result in fire, electric shock, or malfunction. • Do not damage or cut off the ground prong of the power cord. Doing so may cause death, fire, electric shock, or product malfunction. • Improper connection of the equipment grounding conductor can result in risk of electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded. If the plug does not fit the outlet, have a proper outlet installed by a qualified electrician. • The appliance and outlet must be positioned so that the plug is easily accessible. • Do not use an adapter or extension cord. Doing so may result in serious injury, fire, electric shock, or death. • For best performance, plug the appliance into its own individual outlet. This helps prevent overloading house wiring circuits which could cause a fire hazard from overheated wires. • If necessary, use a new, UL-listed 3-prong (grounding) plug rated at no less than the branch circuit. Do not use an extension cord longer than 3 feet. Failure to follow these warnings may result in serious injury, fire, electric shock, or death. Testing the Washer Check if the washer is properly installed and run a test cycle. 1 Load the washer with 6 thick bath towels (approximately 6 pounds). 2 Press the Power button. 3 Press the Speed Wash button. 4 Select the Start/Pause button to start the wash cycle. 5 Make sure that water is supplied, that the washer does not rock or vibrate excessively, and that it drains well during the spin cycle. NOTE • If water leaks during water supply, see Connecting the Water Inlet Hoses to connect them properly. • If the appliance rocks and vibrates excessively, see Leveling the Appliance to level it again. • If the drain does not work, see Connecting the Drain Hose to install the hose properly.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
22
INSTALLATION
rock. If the appliance rocks, level the
appliance again.
Final Installation Check
Connecting the Washer to the
Power Supply
Plug the washer into a
120 VAC, 60 Hz
grounded 3-
prong outlet.
WARNING
•
Do not use a worn or damaged power cord or
power plug. Replace or repair it immediately.
Failure to do so may result in death, fire, electric
shock, or malfunction.
•
Do not modify the power cord and plug provided
with the appliance. Do not damage it when
installing or moving the appliance. Doing so may
result in death, fire, electric shock, or
malfunction.
•
Make sure that the appliance is grounded.
•
Connect this appliance to a grounded outlet
conforming to the rating prior to use. Failure to
do so may result in fire, electric shock, or
malfunction.
•
Do not damage or cut off the ground prong of
the power cord. Doing so may cause death, fire,
electric shock, or product malfunction.
•
Improper connection of the equipment
grounding conductor can result in risk of electric
shock. Check with a qualified electrician or
service technician if you are in doubt as to
whether the appliance is properly grounded. If
the plug does not fit the outlet, have a proper
outlet installed by a qualified electrician.
•
The appliance and outlet must be positioned so
that the plug is easily accessible.
•
Do not use an adapter or extension cord. Doing
so may result in serious injury, fire, electric
shock, or death.
•
For best performance, plug the appliance into its
own individual outlet. This helps prevent
overloading house wiring circuits which could
cause a fire hazard from overheated wires.
•
If necessary, use a new, UL-listed 3-prong
(grounding) plug rated at no less than the
branch circuit. Do not use an extension cord
longer than 3 feet. Failure to follow these
warnings may result in serious injury, fire,
electric shock, or death.
Testing the Washer
Check if the washer is properly installed and run a
test cycle.
1
Load the washer with 6 thick bath towels
(approximately 6 pounds).
2
Press the
Power
button.
3
Press the
Speed Wash
button.
4
Select the
Start/Pause
button to start the
wash cycle.
5
Make sure that water is supplied, that the
washer does not rock or vibrate excessively,
and that it drains well during the spin cycle.
NOTE
•
If water leaks during water supply, see
Connecting the Water Inlet Hoses
to connect
them properly.
•
If the appliance rocks and vibrates excessively,
see
Leveling the Appliance
to level it again.
•
If the drain does not work, see
Connecting the
Drain Hose
to install the hose properly.