Lenovo 4187RVU Lenovo IdeaPad S9e, S10e and S10 Hardware Maintenance Manual - Page 48
connecting
View all Lenovo 4187RVU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Table 1. Numeric error codes (continued) Symptom or error 0231 System RAM Fails at offset: 0232 Extended RAM Fails at address line: 0250 System battery dead-Replace and run SETUP. 0251 System CMOS checksum bad- Default configuration used. 0252 Password checksum bad-The password is cleared. 0260 System timer error. 0270 Real time clock error. 0271 Check date and time settings. 0280 Previous boot incomplete- Default configuration used. 02F0 CPU ID:xx Failed. 02F4 EISA CMOS not writable. 02F5 DMA test failed. 02F6 Software NMI failed 02F7 Fail-safe timer NMI failed FRU or action, in sequence 1. DIMM. 2. System board. 1. DIMM. 2. System board. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. Reset the password by running BIOS Setup Utility. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 3. System board. 1. Charge the backup battery for more than 8 hours by connecting the ac adapter. 2. Replace the backup battery and run BIOS Setup Utility to reset the time and date. 3. System board. Run BIOS Setup Utility to reset the time and date. 1. Load "Setup Default" in BIOS Setup Utility. 2. DIMM. 3. System board. System board. 1. Load Setup Defaults in BIOS Setup Utility. 2. Replace the backup battery. 3. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. 1. DIMM. 2. System board. 40 IdeaPad S9e, S10e, and S10 Hardware Maintenance Manual