Lenovo 43192NF User Manual - Page 127
Screw quantity, Color, Torque, When installing, positions as shown in
View all Lenovo 43192NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Table 32. Removal steps of LCD unit (continued) 8 7 7 6 4 4 5 5 4 Step 7 Screw (quantity) M2 × 4 mm, wafer-head, nylon-coated (2) Color Black Torque 0.181 Nm (1.85 kgfcm) When installing: v Make sure that you attach the LCD connector firmly. v Make sure that you route the cables firmly and tape up in the proper positions as shown in this figure. v When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables to be damaged by the cable guides, or a wire to be broken. Removing and replacing a FRU 119
Table 32. Removal steps of LCD unit (continued)
4
4
4
5
5
6
8
7
7
Step
Screw (quantity)
Color
Torque
±7²
M2
×
4 mm, wafer-head, nylon-coated (2)
Black
0.181 Nm
(1.85 kgfcm)
When installing:
v
Make sure that you attach the LCD connector firmly.
v
Make sure that you route the cables firmly and tape up in the proper
positions as shown in this figure.
v
When you route the cables, make sure that they are not subjected to any
tension. Tension could cause the cables to be damaged by the cable guides, or
a wire to be broken.
Removing and replacing a FRU
119