Lenovo ThinkPad 380ED ThinkPad 385 User's Guide - Page 133
Installing the CD-ROM Device Driver for OS/2, Installing the ThinkPad Features Program for OS/2
View all Lenovo ThinkPad 380ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Installing IBM OS/2 Software Installing the CD-ROM Device Driver for OS/2 If you installed a CD-ROM device driver (ThinkPad 755CD TEAC CD-40E or Non-listed IDE CD-ROM or IDE CD-ROM on the System Configuration screen) when installing OS/2, you do not need to install the CD-ROM device driver. Continue with "Installing the ThinkPad Features Program for OS/2." If you have not installed a CD-ROM device driver when installing OS/2, have the diskettes that came with OS/2; then install the CD-ROM device driver for OS/2 as follows: 1. Start OS/2. 2. Open OS/2 System; then open System Setup. 3. Select Install/Remove (for version 4.0). 4. Select Selective Install; then click on the CD-ROM Device Support. 5. If ThinkPad 755CD TEAC CD-40E is present in the list, select this and click on OK. If not, select Non-Listed IDE CD-ROM or IDE CD-ROM and click on OK. 6. Click on OK at the System Configuration screen. 7. At the OS/2 Setup and Configuration screen, select Install; then follow the instructions on the screen. For information about the software parameter in the CONFIG.SYS file, refer to the README file in the CD-ROM Diskette. Installing the ThinkPad Features Program for OS/2 To install the ThinkPad Features program: 1. Start OS/2; then insert the Utility Diskette for OS/2 into the diskette drive. 2. Install the ThinkPad System Management device driver: a) Open OS/2 System and then System Setup. b) Select Install/Remove (for Version 4.0). c) Select Device Driver Install and click on the Install... button. Chapter 7. Installing Software 113