Lenovo ThinkPad 380ED ThinkPad 385 User's Guide - Page 137
Installing the Infrared Device Driver for OS/2, OS/2 Warp Server, or TCP/IP for OS/2.
View all Lenovo ThinkPad 380ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Installing IBM OS/2 Software Installing the Infrared Device Driver for OS/2 The infrared device driver for OS/2 is included in the application TranXit for OS/2. There are two types of infrared device drivers for OS/2: Infrared device driver to support simple file transfer with the application TranXit for OS/2. Infrared device driver to support networking over an infrared link with the IBM Multi-Protocol Transport Service (MPTS) software. The two drivers cannot work together, so you must install only the one you use. The former is included in TranXit for OS/2, and is installed when you install the application. You need not install it separately. The latter is included in the Infrared Features Diskette II, and is installed as a Network Device Interface Specification Version 2 (NDIS2) compliant network adapter driver, when you install and configure the MPTS networking software that comes with OS/2 Warp Connect, OS/2 Warp Server, or TCP/IP for OS/2. Refer to the respective networking software publication for installation procedures. The README file on the Infrared Features Diskette II also contains additional information. Modify the config.sys as follows: C:/OS2/DLL/IRDD.SYS to C:/OS2/DLL/IRDD.SYS 3F8 4 Where: 3F8 is I/O port address. 4 is IRQ. Chapter 7. Installing Software 117