Lenovo ThinkPad 380ED ThinkPad 385 User's Guide - Page 218
Set the timer to enter hibernation mode from suspend mode after
View all Lenovo ThinkPad 380ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Using PS2 Commands Enter RediSafe suspend mode: SAfe Enable | Disable - Set power on or off for the serial device attached to the serial port: SErial ON | OFf - Note: When the AC or DC option is not specified, this command is effective on the current power mode set by the PM commands. Set the processor speed: AC: Specifies battery mode when the AC Adapter is connected. DC: Specifies ac mode when using battery power. Parameter1 SPeed Parameter2 Fixed | Auto Parameter3 MAX | Medium | Slow | MIN Parameter4 [AC | DC] Set the timer to enter hibernation mode from suspend mode after the specified number of minutes: Parameter1 S2H Parameter2 30 | 60 | 90 | Disable Parameter3 - Set the timer to enter standby mode after the specified number of minutes (xx): AC: Specifies battery mode when the AC Adapter is connected. DC: Specifies ac mode when using battery power. STandby xx [AC | DC] Note: Set the power management mode to enter by the automatic power-saving Create the hibernation file using the timer: HFILE command before using the TI H command. TImer Suspend | Hibernation - 198 IBM ThinkPad 385 or 385D User's Guide