Lenovo ThinkPad 380ED TP 380Z On-line User's Guide that was provided with the - Page 137
Enabling or Disabling a Flash (POST/BIOS) Update from the Network, Reset, CONFIG, Network, Enable
View all Lenovo ThinkPad 380ED manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
5 Click on OK. Note: If you want to change the settings, click on Reset and make the settings again. Enabling or Disabling a Flash (POST/BIOS) Update from the Network When a Flash (POST/BIOS) update from the network is enabled, the system programs in your computer can be updated remotely by a network administrator from a management console. The following requirements must be met, however: Update Flash from Network must also be enabled. (See the following steps.) Your computer must be started over the LAN. Your computer must be engaged in a remote program load. Network-management software is required in the remote administrator's computer. To enable or disable the Flash (POST/BIOS) update from Network setting, do the following: 1. Click on the CONFIG icon. The "Configuration" window appears. 2. Click on the Network icon. The "Network" window appears. 3. Select either the Enable or the Disable button beside "Flash." 4. Click on OK. Chapter 7. Using System Management 133