Lenovo ThinkPad X131e (English) User Guide - Page 102
Menu item, Selection, Comments, Legacy Only, Legacy, first, Enabled, UEFI Only, UEFI first
View all Lenovo ThinkPad X131e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Table 4. Config menu items (continued) Menu item Submenu item Selection USB Ethernet LAN Option ROM (for Legacy Only boot mode or Both with Legacy first) UEFI IPv4 Network Stack (for UEFI Only boot mode or Both with UEFI first) • Disabled • Enabled • Disabled • Enabled UEFI IPv6 Network Stack (available when UEFI Only boot mode or Boot with UEFI first mode is selected) • Disabled • Enabled UEFI PXE Boot Priority • IPv4 First • IPv6 First Wireless LAN and WiMAX Radios • On • Off USB UEFI BIOS Support Always On USB • Disabled • Enabled • Disabled • Enabled Always On USB Charge in Off Mode • Disabled • Enabled 86 User Guide Comments function is enabled with any power sources. Note: It is required to use ac power with the magic packet type Wake on LAN function. Note: The Wake on LAN function does not work when a hard disk password is set. Loads the Ethernet LAN Option ROM to enable startup from an integrated network device. Enable or disable Internet Protocol Version 4 (IPv4) network stack for UEFI environment. Enable or disable Internet Protocol Version 6 (IPv6) network stack for UEFI environment. Select Network Stack priority for UEFI PXE Boot. If you select On, the internal wireless radio is turned on. If you select Off, the internal wireless radio is turned off. Enables or disables boot support for USB diskette and USB CD-ROM. If you select Disabled, the external USB devices cannot be charged through USB connectors. If you select Enabled, the Always On USB connector enables you to charge some mobile digital and smartphones when the computer is powered off on the condition that the ac power adapter is connected. Note: If you want to charge these devices when your computer is powered off, you will need to connect the ac power adapter, open the Power Manager program, and configure corresponding settings to