Lenovo ThinkPad X200s Hardware Maintenance Manual - Page 103
Following step is only for ThinkPad X201 and X201i., Route the speaker cable as shown in this figure. - thinkpad x200
View all Lenovo ThinkPad X200s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Table 22. Removal steps of base cover assembly for ThinkPad X200, X201, and X201i (continued) In step 5 and 6 , remove the system board, the DC-in connector, and the fan assembly together from the base cover assembly. When installing: Check the position of the wireless switch a , and firmly fit the system board into the base cover assembly. Note: Following step is only for ThinkPad X201 and X201i. Cable routing: Route the speaker cable as shown in this figure. Chapter 8. Removing and replacing a FRU 97
Table 22. Removal steps of base cover assembly for ThinkPad X200, X201, and X201i (continued)
In step
5
and
6
, remove the system board, the DC-in connector, and the fan assembly together from the base
cover assembly.
When installing:
Check the position of the wireless switch
a
, and firmly fit the system board into the base cover assembly.
Note:
Following step is only for ThinkPad X201 and X201i.
Cable routing:
Route the speaker cable as shown in this figure.
Chapter 8
.
Removing and replacing a FRU
97