Lexmark 13H0300 User's Guide - Page 90

Basics Copying Printing Scanning Faxing Troubleshooting Index Troubleshooting 83 Message: Solution: Memory To Print Your copy job will print after the print job is complete. Open Cover And Remove Open the operator panel and remove the jammed document. Paper Jam PC Not Available (with beep warning and return to Ready state) • Most of the time, when PC Not Available appears on your operator panel display, you are attempting to make multiple copies while your All-In-One is set to a color copy mode. If you would like to make multiple black and white copies without a computer, you can change the color mode to Black Draft, Black Normal, or Black Photo using the menus on your operator panel display. If you would like to make multiple color copies, you must attach your All-In-One to your computer using a USB cable. - If you have installed the All-In-One software on your computer, click Start Programs Lexmark X125 Settings Utility. Use the Lexmark X125 Settings Utility to adjust the copy settings. - For All-In-One CD software installation instructions, refer to the Quick Reference. • If PC Not Available appears on your operator panel and you are not attempting to make multiple copies, verify that a standard USB cable is connected to the computer and that the computer is on and not in sleep mode. Remove Paper Jam Then Clear the Paper jam, and then press Start/Yes. Press Start www.lexmark.com Lexmark X125