Lexmark 34S0300 User's Guide - Page 119
Warning-Potential Damage, CAUTION-HOT SURFACE, Remove the jammed paper.
View all Lexmark 34S0300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
2 Lift and pull the unit containing the photoconductor kit and the toner cartridge out of the printer. Set the unit aside on a flat, clean surface. Warning-Potential Damage: Do not touch the photoconductor on the underside of the photoconductor kit. Use the cartridge handle whenever you are holding the cartridge. CAUTION-HOT SURFACE: The fuser and the inside of the printer near the fuser may be hot. To reduce the risk of injury from a hot component, allow the surface to cool before removing paper from this area. 3 Remove the jammed paper. Note: If the paper is not easy to remove, then open the rear door to remove the paper. 4 Align and reinstall the unit. Clearing jams 119
2
Lift and pull the unit containing the photoconductor kit and the toner cartridge out of the printer. Set the unit
aside on a flat, clean surface.
Warning—Potential Damage:
Do not touch the photoconductor on the underside of the photoconductor kit.
Use the cartridge handle whenever you are holding the cartridge.
CAUTION—HOT SURFACE:
The fuser and the inside of the printer near the fuser may be hot. To reduce the
risk of injury from a hot component, allow the surface to cool before removing paper from this area.
3
Remove the jammed paper.
Note:
If the paper is not easy to remove, then open the rear door to remove the paper.
4
Align and reinstall the unit.
Clearing jams
119