Lexmark 912dn User's Reference - Page 60
Infrared Menu, Values marked by an asterisk * are the factory default settings - printer cartridges
UPC - 734646479226
View all Lexmark 912dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Using printer menus Menu Item Purpose Values Staple Job To set stapling as the default for all Off* print jobs. (Select stapling from the printer driver if you want to staple On only specific jobs.) Staple Prime Src To specify the paper source you want the printer to use when it primes the stapler. When a staple cartridge is replaced or a staple jam is cleared, the printer may need to prime the stapler by stapling a sheet of paper several times. Tray (Tray 1*) MP Feeder Does not staple print jobs. Staples each print job sent to the printer. Selects paper from the specified tray. Selects paper from the multipurpose feeder. Infrared Menu The Infrared Menu is only displayed when at least one infrared interface exists on the printer. Note: Values marked by an asterisk (*) are the factory default settings. Menu Item Infrared Port PCL SmartSwitch PS SmartSwitch NPA Mode Purpose Whenever the value of the NPA Mode, Infrared Port, or Job Buffering is changed from the operator panel, the printer automatically restarts upon exiting the menus in order to reconfigure memory. Note: Only one of the installed infrared ports are displayed. If there are multiple infrared ports available, the user cannot specify which one will be activated. The first option is always enabled (for example, the option with the lowest slot number). =Disabled* =IR Option X Note: Only displayed when both PCL and PostScript interpreters are available AND Infrared Port is not set to Disabled. =Off =On* Note: Only displayed when both PCL and PostScript interpreters are available AND Infrared Port is not set to Disabled. =Off =On* Whenever the value of the NPA Mode, Infrared Port, or Job Buffering is changed from the operator panel, the printer automatically restarts upon exiting the menus in order to reconfigure memory. Note: Only displayed when Infrared Port is not set to Disabled. =Off =Auto* Infrared Menu 55