Lexmark C4352 Users Guide - Page 165
Error codes, Error message, Solution, Reminder: Remove packaging.
View all Lexmark C4352 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Troubleshoot a problem 165 Error codes 12.11, 12.21, 12.31, 12.41, 12.51 12.12, 12.22, 12.32, 12.42, 12.52 12.91 12.92 29.08 31.30 31.35 Error message Solution Change to Open the indicated tray, remove . paper, and then load the correct paper type and size. For more Change to information, see "Loading trays" on . page 27. Change multipurpose feeder to . Change multipurpose feeder to . Remove paper, and then load the correct paper type and size. For more information, see "Loading the multipurpose feeder" on page 30. Reminder: Remove packaging. 1 Open door A, and then remove the packing material inside the printer. 2 Pull out each of the three red clips starting with the upper left, lower left, and ending on the right side. 3 Close door A. 4 Open door B. 5 Pull out the red loop on the right side. 6 Close door B. Transfer module problem. Restart printer. 1 Turn off the printer, and then unplug the power cord from the electrical outlet. 2 Connect the power cord to the electrical outlet, and then turn on the printer. Reinstall missing or unresponsive waste toner bottle. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. 1 Open door B. 2 Remove the waste toner bottle. Note: To avoid spilling the toner, place the bottle in an upright position. 3 Insert the waste toner bottle. 4 Close door B.